ENGINE MAINTENANCE - Engine Coolant Specifications Nitrited Extended Life Coolant Engine Coolant Specifications Maximum allowed operating temperature 225°F (107°C) For nitrited formulations (NOAT), a heavy- duty extended life coolant that meets ASTM D6210 and Caterpillar EC-1 specifications must be used. 2 Engine capacity, pressure, and temperature specifications. NOTE The change interval for extended-life coolant containing nitrite and molybdate is 750,000 miles (1,200,000 km) or 12,000 hours of on-road use (8 years or 15,000 hours of off-highway use) on initial fill with no extender added.
The change interval is 1,000,000 miles (1,600,000 km)/20,000 hours/8 years with an extender addition at 500,000 miles (800,000 km)/10,000 hours/4 years. Coolant volumes are dependent on chassis model and cab/ sleeper heater options. Engine Coolant Specifications for PACCAR PX-7 Coolant Capacity (engine only) 3.0 gal (11.5 liters) Extended Life Coolant Standard modulating thermostat range 186-207°F (86-97°C) Information on using Extended Life Coolant (ELC). Nitrite-Free Extended Life Coolant Nitrite-free organic acid technology coolant (OAT) may be used if it meets DAF 74002.
Minimum recommended pressure cap 15 psi (103 kPa) Perform these maintenance procedures according to the Preventative Maintenance Schedule. The change interval for nitrite free coolant is 600,000 miles (1,000,000 km) or 6 years, with no extender needed. DO NOT add coolant extender to nitrite-free coolant. Follow the coolant supplier's drain/flush/fill/ diluting percentages when servicing a vehicle filled with nitrite-free coolant. Conduct coolant maintenance checks including freeze point, pH, nitrite and carboxylate tests at least twice annually to maintain engine protection.
Maximum recommended pressure cap 25 psi (172 kPa) Minimum recommended operating temperature 160°F (71°C) Additional Recommendations: 54 Y53-1183-1E1 (04/16/18)