ENGINE MAINTENANCE - Maintenance Procedures Oil Level Indication on Dipstick Engine Oil Dip Stick Markings This procedure should be followed when oil level is low and more oil needs to be added. High and low marks on the dipstick indicate level of oil in the oil pan. 2 1. Top up with oil, if necessary, via the filler opening. Use the correct grade in the correct quantity. 2. After topping up, wait one minute and check the oil level again. 3. Reinstall the oil fill cap and twist to lock it in place. NOTE On the engine oil dipstick, the differ- ence between the low oil level mark (2) and high oil level mark (1) is two US quarts (1.9 liters).
1 2 Engine Oil Filter Procedure for replacing engine oil filters. Always use quality engine lubricating oils in conjunction with the appropriate oil drain and filter change intervals. Refer to the “Preventative Maintenance Schedule” for the recommended oil and filter change service interval. 1. High oil level (1) 2. Low oil level (2) Topping Up the Engine Oil CAUTION Steps for topping up the engine oil. Use of non-genuine oil filters can cause severe engine damage. If checking the engine oil just after stopping the engine, wait 15 minutes for the oil to drain back into the oil pan before checking the fluid level. 60 Y53-1183-1E1 (04/16/18)