. OPERATION DETAILED CONTROLS AND GAUGES SUN ROOF WARNING Closing WINDSHIELD WARNING 3 - 44 (PC600,PC600LC pull up cab specification m When standing up from the operator's seat, pus LOCK position (L). h lock lever (1) down securely to set it to If l ock lever (1) is at the FREE position (F) and the c ontrol lever is touched by mistake, this may lead to a serious accident. Opening (1) securely to LOCK position (L). 1. Set lock lever 2. Check for any (A) located on window grasp . Set lock lever (1) securely to LOCK positi . Check for any ceiling window movement by pulling lock knob front side, then push up and open the ceiling ing grip (B).
Hold grasping grip (B), lower the ceiling windo w, and apply lock (A). If the lock cannot be ap plied, open the ceiling window, then pull it in again and apply the loc (PC600,PC600LC pull up cab specification m When opening or closing the front window, bo ttom window, or door, always set lock le ver (1) to LOCK position (L). If the control leve rs are not locked and they are touched by accident, this may lead to a serious accident. When opening or closing the window at the fro nt of the cab, stop t he machine on horiz ontal ground, lower the work eq uipment completely to the ground, stop When opening th the engine, then carry out the o e front window, hold the grip sec peration.
urely with both hands, pull up, and do n ot let go until the automatic loc k catch is locked. When closing the front window, the window will move quicker under its own weight. Hold the grips securely with both h ands when closing i t. It i s possible to st ow (pull up) the front windo w in the roof of the operator's co