Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING and hoses. If any problem is 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. idler, guard) for damage, wear, loose bolts, or leakage of oil from 3 - 79 Walk-around Checks Before star ting the engine, walk around the machine and look at th e underside o f chassis for anything unusua l like loose bolts and nuts, leakage of fuel, oil and coolant. Also check the condition of the work equipment and the ystem.

for loose wiring, play, and collection of dust at places that reach high temperature. onditio hydraulic s Also check for loose wiring, play, and c ollection of dust at places t hat rea ch hig h tempera Remove any flammable materials from aroun d the battery, engine, muffler, turbocharger, o r other hig h temperature engine p arts. Leakage of f uel or oil will cause the machine t o catch fire. Check carefully, b e sure to repair any proble m, or contact y our Komatsu distributor. Perform th e following inspections and c leaning every day before s tarting engine for the d 1. Check for damage, wear, play in wo rk equipment, cylinders, li nkage, hoses Check found, ylinders 2.

Remov e dirt and debris from around the engine, battery, and r adiator. Check etc.) ar flamma for dirt accumulated around th e engine and radiator. Also check f or flammable m aterial (dry le aves, t wigs, ound the battery, engine mu ffler, turbocharger, or other high temperature engine parts. If any dirt or ove them. ble materials are found, rem 3. Check for coolant and oil leakage a round the engine Check it. for oil leakage from the engin e and coolant leaks from th e coolin g system. If any problem is f ound, r epair 5. Check for oil leakage from hydraulic equipment, hydraulic tank , hoses , and Check for oil leakage. If any proble m is found, repair the area where o il is le 6.

Check the undercarriage (track, spr roblem is found, repair it. rollers. If any p 7. Check for problems in handrails, ste If any p roblem is found, repair it. Tig 8. Check for problem in gauges, monit or. Check Clean for problem in the gauges an d monitor in the operator's cab. If any p roblem is found, replac e the p arts. off any dirt from the surface.