. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATION WARNING position and confirm that swing lock monitor lamp (2) lights up. 3 - 111 Before o perating t he control leve r, check the directio n of the tr ack frame . If the track frame is faci ng the rear (if the sprocket is at the front), th e machine mov es in the o pposite direction from the operation of the travel lev er (front and rear travel is reversed , left and right steering i s reversed). Before st arting the machine off, c heck that t he area a round the machine is safe, and sound the ho D o not al low anyo ne to enter the area aroun d the machine. Clear an y obstacle s fro m the trav el path.
There is a blind sp ot at the rear o f the machi ne, so be particularly carefu l when traveling in revers If the con trol lever is operated wh en the auto deceleration is being actuated, the engine speed will s uddenly rise, so be careful when op erating. machine off, check that the travel alarm sounds normally. Before st arting the machine off, c heck that t he travel alarm sound Preparations for Moving the Machine 1. Set sw ing lock switch (1) to the ON (actuate 2. Turn f uel contr ol dia l (3) tow ards the fu ll speed positio n to i ncrea se the e ngine speed.