. OPERATION MACHINE OPERATIONS AND CONTROLS WORKING MODE Setting Economy Mode We recommend adjusting the economy mode settings to give the fuel consumption and production in the table below. REMARK The closer the selection is made to E3, the better the fuel consumption becomes, but the production is reduced accordingly. w : Work possible without problem (can carry out that operation without problem) Q : Work possible (can carry out operation with some minor problems) U : Work possible (can carry out operation but there are many problems) Ї :
Work impossible (too many problems, cannot carry out operation) 3 - 120 Working Mode or switch can be used to switch the mode to match operating conditions and purpose, be performed efficiently. se of each mode as follows. g switch is turned to the ON position, the working mode is set to P mode (digging). mode switch to set the mode to the most efficient mode to match the type of work. The mo de select can enabling work to be performed efficientl Make effective u se of each mo de as follows.
When th e startin g switch is tur ned to the ON position, the working mode is set to P mode (diggin Use the working mode switch to set the mode to t he most efficient mode to match the type of wor urpose, thereby Working mode Applicable operations P mode ( Normal digging, loading operations Operations with emphasis on productivity) E mode ( Normal digging, loading operations Operations with emphasis on fuel economy) L mode ( When positioning work equipment exactly Fine-control operations) Mode Dumping and loading Handling overburden Excavated and blasted rock Pit r excavation Trenchi Handling emaining Soft S walls rock be ng Lifting andy work drock Blasted rock Loosened sandy soil Soft rock Sandy bedrock E0 w w Q w Q Q Q Q Q w E1 Q Q Q Q U U U U U w E2 U Q U U ¯ ¯ ¯ ¯ U Q E3 ¯ U ¯ ¯ ¯ ¯ ¯ ¯ ¯ Q