Komatsu — BUCKET REPLACEMENT

. OPERATION MACHINE OPERATIONS AND CONTROLS BUCKET REPLACEMENT WARNING 3 - 132 Whe n pins are knocke d in with a hammer, pieces of metal may fly and caus Whe n carrying out thi s operation, always wear g oggles, hard hat, gloves, a nd other protective e Whe n the bucket is re moved, place it in a stable If pin s are hit with a str ong force, there is a hazard that the pin may f ly ou t and injur e people in the surrounding area . Make sure that there is no one in the surrounding area befo re starting the operation. Whe n removing the pi ns, do not stand behind the bucket. In additio n, be extremely careful not to put your foot unde r the b ucket whil e standing at the side for the work.

Whe n removing or ins erting pins, be extremely c areful not to get y our f inge Neve r insert your fing ers into the pin holes when aligning the hole Stop th e machine on a firm and flat surface an d do the work. W hen performing joint work , appoint a lead and f ollow that pe rson's instructio Replacement 1. Pla ce the bucket i n contact with a flat surf REMAR K removing the pins, place the bucket so that it is in light contact with the ground. When removing the pi ns, place the bucket so that it is in light contact with t If the b ucket is lowere d strongly to the ground, the resistance will be in creased and it wi ll be difficult to r emov e the pins. 2.

Re move the stopp er at the end of the pin, t hen pull out pins (A) an d (B) and remo ve the bucket. NOTICE After re moving the pins, make sure that mud or sand does not get on t hem. Dust se als are fitted at bo th ends of the bushings, be careful not to damage them.