Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BUCKET TEETH (KMAX) WARNING turn it 4 - 29 Replace te Replace t he bucket teeth before th e adapter starts to wear It is dan gerous if the work equipme nt moves by mistake when the t eeth are being replaced. o the LOCK position. Set the w ork equipment in a stable c ondition, then stop the engine and set the lock lever securely t There is a hazard that fragments will fly during the replacement work , so always wear protective equi pment like safety glasses and glov es. oth pins cannot be removed in this procedure, for safety's sake, be sure to ask your Komatsu distributor for the ent.

If the to replacem Prepare fo r a socket wrench for 14 mm- width across flats 1. Set th e bucket with the bottom o f the bucket on block (3) so t pin (1) can be removed, then s 2. Within contro l lever (for work equipm ent and travel) to the ful in all d irections to release the i 3. Check that the work equipment is in a stable condition, t hen the loc k lever to the LOCK pos 4. Fit a socket wrench to the head of pin (1), then counterclockwise 90° to releas e the lock of the pin.