. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING REMARK 4 - 73 EVERY 2000 HOURS MAINTENANCE Maintenance for every 10, 100, 250 , 500, and 1000 ho urs of servic e shoul d be performed a t the same ti The parts and oil are at high temperat ure immediately afte r the engine is stopped , and may cause se rious burns. Wait fo r the temperature to g o down before startin g the operation. If there is still pr essure remaining ins ide the cas e, the oil or plug may fly out. Loosen the plug slowly to release the Refill capacity: each 10 liters (2.6 Prepare a han 1. Set the TOP mark at the top, wit h the TO P mark a nd plu g (P perpendicular to the ground surf 2.
Remove plug s (P) and (F) with t he handle and dra in the oil. Check the O-ring s in the plugs for d amage. If necessa with 3. Tighten plug ( P). h the hole of plug (F). 4. Add oil throug h the hole of plug 5. When oil begi ns to overflow from the plug (F) hole, install plug (F). que of plugs (P) and (F): (7 ± 1 kgm, 50.6 ± 7.2 lbft) Tightening tor que of plugs (P) a 68.6 ± 9.8 Nm (7 ± 1 kgm, 50.6 ± 7.2 lbft)