. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE Operation of counterweight remover WARNING as it moves, to make sure that it the operation of the work valve to the "REMOVAL / When lowering counterweight CAUTION 1. Make sure that lock lever (1) in the operator's cab is in the LOCK (L) position. 2. Turn lock switch (2) in the pump chamber to the LOCK (c) position. 6 - 8 When operati ng the counterweig ht remove r device, do not a llow anyone to come close to the mac When operati ng the counterweig ht remove r device, be sure t o apply the lock switches in the operat in the hydraul ic pump chamber.
When removi ng or installing the counterweight, park the ma chine on the flat and solid ground free o and then do t he work. When removi ng or installing the counterweight, lower the w ork equipment to the ground to stabiliz When removi ng or installing the counterweight, keep the en gine running at low idling. While removi ng or installing the counterweight, keep a clos e watch on the counterweight, as it m moves withou t a hitch. unterweight is not secured to the revolving frame, never do the digging work (i.e. When the co equipment, tr avel and swing). B y the same token, never do t he same when the counterweight is str NOTICE Be sure to ap ply grease after the counterweight is removed.
For the greasing points, see"GREASIN In the counte rweight removal a nd installation work, be sur e to turn the remover control selector INSTALLATIO N" position before setting ab out the work. If th is step is neglected, the hydraulic pum machine's life will be shortened. When the cou nterweight remova l or installation work finishe s, turn the remover control selector val and start ordi nary work thereaft er. When switching the remover contr ol selector valve, make sure