. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE speed. 6 - 10 Operate counter slowly to the R stallation B cont nd extend B re rol lever (8) mover link cylinder (9) to th e stroke end (max.) . Then B remov er link (10) is stretched, and the counterweight begins to rise as it is also stretched. In thi s process, raise th e counterweigh t slowly by keeping counter at its half stroke weight removal / ins instead of at the full tallation B contr stroke to contr ol lever (8) ol the rising 8. Operate counte rweight removal / i nstallation A co ntrol lever (11) slowly to th e LOWER (f) positio n, allowing A re mover link (12) to be stretc hed.
At that time, th e counterweigh t begins to lower together a s it is also stretched . In this process , lower the counterweight s lowly by keeping counterweight removal / installation A con trol lever (11) at its half stroke inste ad of at the full stroke to con trol the lowering sp eed. y to the ground. 9. Lower the count erweight completel y to the ground. 10. Remove 2 pin st opper bolts (13), th en remove 2 pin s (14) from the counterweig 11. House remover l inks (10) and (12) in the original spo ts, turn the position of an ar row stamped on th e head of remo ver control selector valve (5 ) from view "Z" to v iew "Y", and the n secure it with bolt (6) and lever (7). 12.
Turn lock switch (2) to the FREE (d