. OPERATION DETAILED CONTROLS AND GAUGES Gauges and Meter 3 - 18 Engine Coolant Temperature G auge coolant temperature. cator should be in the black range the red range (A) - (B) during ntion system is actuated. Gauge (8) indicates the engine During normal operations, indi (A) - (C). If indicator enters operations, the overheat preve (A) - (B): Red range (A) - (C): Black range The overheat prevention syste m acts as follows. e water temperature monitor (D) up red. e speed is reduced to low idling, e water temperature monitor (D) Red range position (A) : Engin lights Red range position (B) : Engin engin lights sound The overheat prevention sy up red, and the alarm buzzer s at same time.
stem remains actuated until the nge. he indicator is at position (C), itor (D) lights up white. ming-up operation. For details, see 2)". indicator returns to the black ra When the engine is started, if t engine water temperature mon In this case, carry out the war "Engine Warm Up (PAGE 3-10 Fuel Gauge uel in the fuel tank. or should be in the black range. If Meter (9) displays the level of f During operations, the indicat If indicator enters red range (A) d uring operations, there is less than 101 liters (26.68 US gal) of fue add fuel. (A) - (B): Red range (A) - (C): Black range l remaining in the tank, check and REMARK If the indicator enters red ran ge (B), there is less than 84 liters g.
When the indicator is in the red itor (D) lights up red. (22.19 US gal) of fuel remainin range (A) to (B), fuel level mon If the indicator enters the red range (A) to (B), do not carry out operations on steep slopes. Th ere is danger of the engine stalling. The correct fuel level may not be displayed for a short time when the starting switch is turned ON , but this is not an abnormality.