Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES normal. switch (7). 3 - 28 5. When the fan rotation is being changed, the screen c hanges t the waiting screen. Th e engine is automatically set to lo idling, and after approx. 15 seconds, the fan rotates i n revers NOTICE The fan rotation speed is pr oportional to the engine speed. When th e engine is r unning at low i dling, the fan also r otates at minimum speed. If it is desi red to raise the fan rotating spe ed, use th e fuel contr ol dial to raise t he engine speed. When rotating the fan in rev erse with the engine stopped, c hange to this screen, then turn the s tarting switch to th e START position.

This screen does not change until the engine starts, so if it is desired to cancel, turn the starting switch to the OFF position. 6. When the fan rotates in reverse, the screen switches automatically to the screen shown on the right (yellow display). While the fan is rotating in reverse, the screen maintains this display. position. This screen does n ot change until the engine star ts, so if it is desired to cancel, turn th e starting switch to the OFF 6. automatically to the scre en shown on the right (yello w display 7. If any abnormality occur s when the fan is rotating in reverse, warning monitor is displ ayed as shown in the diagr am on th right.

If the warning mon SYSTEM (PAGE 3-5)" a itor is displayed, see "MONITORIN nd follow the instructions. 8. When changing the f an rotation direction from revers direction to the normal d irection, press User mode adjustme