. OPERATION DETAILED CONTROLS AND GAUGES Lamp Switch lamps, working lamps, Swing Lock Switch WARNING 3 - 36 Switch (5) is additional lam ps at top front of the cab, and (a) ON: Lamp (b) OFF: Lam When the m achine is traveling under its own p ower, or when the swing is not being operated, always set the switch t o the ON position (a). On slopes, e ven when the swing lock switch is at the ON position (a), the weight of th if the swing e work equipment may cause the upper structure to swing control lever is operated in the do wnhill direction. Switch (6) is u sed to lock the upper structur e so it cannot swing. (a) ON position (actuated) :
The swing lock is always applied, and the upper struct if the swing condition, the s up. ure will not swing even is operated. In this wing lock lamp lights (b) OFF position (canceled) : The swing loc k is applied only when all the work eq are in neutr equipment co the swing lock uipment control levers al; when any work ntrol lever is operated, is canceled. The swing loc k is actuated approx. 7 secon ds after all the control levers are pla ced in the neutral position.