. OPERATION DETAILED CONTROLS AND GAUGES Lower Wiper Switch (if equipped) This switch (13) operates the lower wiper (A). (a) ON position: Lower wiper (A) is actuated (b) OFF position: Lower wiper (A) stops Step Light Switch (if equipped) Use this switch (14) when getting off the machine at night. 3 - 39 If this switch is turned to the ON position at the same time as the wiper switch, the wiper and lo wer wiper (A) will be actuated in turn. REMARK If the wiper and lower wi time, lower wiper will not (monitor) is turned OFF. (13) OFF.
When the wiper is unde position, if the lower wipe lower wiper will be actuate per are being actuated at the same stop even when the wiper switch To stop the lower wiper, turn switch r continuous operation at the ON r switch is turned ON, the wiper and d in turn. If the lower wiper switch is at the ON position and is operating continuously, and the w monitor, the lower wiper ( actuated in turn. iper is actuated with the machine both INT and ON) and wiper will be When the switch is turned to the ON (a) position, the step light will light up for approx. 60 Even if the starting switch seconds. key is at the OFF position, the step light will light up for appr pressed. ox.
60 seconds when the switch is One-Touch Power Max. Switc h This switch (15) on the left wo rk equipment control lever is used to actuate the power max functi ons. nd keep the switch pressed. The on is actuated for a maximum of 8.5 Press once (single click) a one-touch power max. functi seconds at P and E mode.