П Place the EPS torque sensor lead and differen- tial gear motor lead in the holder, and then insert the ends of the holder into the hole in the stay on the frame. Р Route the differential gear case breather hose to the inside of the frame. С Fasten the differential gear case breather hose to the frame with the plastic band, making sure to face the end of the band inward. Т Attach the ground lead terminal to the frame using the bolt. У Route the radiator fan motor breather hose, dif- ferential gear case breather hose, and horn switch lead to the inside of the fast idle plunger outlet hose and radiator outlet hose. Ф Make sure that the catch of the holder is facing outward.
Х Face the end of the plastic band inward. Ц Route the fuel tank drain hose and position the end of the hose as shown in the illustration. К Л 2 3 5 6 7 4 И Й 1 E A 8 М У B D A B C Т D C С 9 C 0 A Р E E B D 5 П О Н Ы Ь F 1 F 1 Ф 4 A-A B-B B-B G Х Х Ц Ы Ь C Ч Ш 1 1 0 4 F C-C Х C-C F J A Ш Х 9 Щ A I H Ъ D 5 E-E CABLE R SPEC OUTING