b INSTALLING THE PITMAN ARM (YFM7FGX only) 1. Install: pitman arm 1 washer pitman arm nut a 1 NOTE: Align the groove a in the pitman arm with the steering stem spline b that is indented. clip INSTALLING THE LOCK WASHER (YFM7FGX only) 1. Install: cable guide lock washer steering stem bushing bolts a New a T R . . 23 Nm (2.3 m · kg, 17 ft · lb) NOTE: Bend the lock washer tab a along a flat side of the bolt. Pass the cable and hoses through the cable guide. Refer to “CABLE ROUTING”. STEERING SYSTEM CHAS CHAS T.R. 190 Nm (19.0 m · kg, 140 ft · lb)