Testing Charge-air temperature sensor Flash code: 3x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: Charge-air temperature sensor Effect of fault: Reduced full load quantity* Possible cause: Line break, short-circuit, charge-air temperatur sensor faulty, control 8nit faulty Test precondition: EDC control unit connected Socked box connected * Function not envisaged in EDC control unit. Reduction must be carried out using the vehicle management system. 31 Test Measurement Corrective measures Sensor resistance Measure resistance at the socket box across pin 55 and pin 13 Set-point value:
3.8–0.8 kΩ at 10–50°C – Check lines – Check plug connections – Replace temperatur sensor – If no fault found, replace control unit Sensor voltage Measure voltage at socket box across pin 55 and pin 13 Set-point value: 4,17–2,62 V at 10–50°C