DISASSEMBLY AND ASSEMBLY IDLER • RECOIL SPRING REMOVAL OF IDLER • RECOIL SPRING ASSEMBLY 1. Remove track shoe assembly. For details, see RE- MOVAL OF TRACK SHOE ASSEMBLY. 2. Sling idler and recoil spring assembly (1), and pull out to the front to remove. Idler • recoil spring assembly: 275 kg 3. Disconnect recoil spring assembly (3) from idler as- sembly (2). 1 Idler assembly: 140 kg Recoil spring assembly: 135 kg INSTALLATION OF IDLER • RECOIL SPRING ASSEMBLY Carry out installation in the reverse order to removal.
1 # When installing the idler assembly and recoil spring assembly, assemble so that the position of the greasing plug on the idler is on the outside for the right side of the machine and on the inside for the left side of the machine. 30-68