Freightliner — Freightliner Business Class M2 Workshop Manual

Diesel Exhaust Fluid System, EPA10 49.03 Tank Flushing If a contaminant has been introduced into the diesel exhaust fluid (DEF) system and the engine has been started, the following DEF components must be re- placed: Tank Pump Header unit Metering unit See the other subjects in this section for tank, pump, and header unit replacement. Injector See the engine manufacturer’s service literature for other component replacement instructions. Flushing If a contaminant has been introduced to the DEF tank, but the engine has not been started, complete the following steps. 1. Apply the parking brake and chock the tires. 2. Place a suitable container underneath the DEF tank to catch any draining DEF.

IMPORTANT: Discard contaminated DEF or coolant in accordance with EPA regulations. 3. Remove the DEF and contaminant from the tank. On vehicles with a 6-gallon DEF tank, disconnect the DEF line from the DEF outlet port and let the DEF drain into the drain pan. On vehicles with a 13- or 23-gallon DEF tank, use a siphon to empty the DEF from the tank. 4. Remove the DEF tank. See Subject 100 for in- structions. 5. Thoroughly flush the tank with water until the tank is free of all contaminants. 6. Install the DEF tank. See Subject 100 for in- structions. Business Class M2 Workshop Manual, Supplement 17, March 2010 150/1