Freightliner — Freightliner Business Class M2 Workshop Manual

Multifunction Turn Signal Switch 54.15 General Information General Information The multifunction turn signal switch is mounted on the left side of the steering column, just below the steering wheel. The switch controls the: turn signals windshield wipers and washers headlight dimmer/flash to pass The switch uses a low-current resistive ladder net- work for the switch functions. Low-current switches allow the use of smaller diameter wires, while the resistive ladder network reduces the number of wires. hazard warning flasher Each switch function corresponds to a resistive out- put.

The resistive ladder output is connected to the instrumentation control unit (ICU3-M2) where the sig- nals are processed and sent to the Bulkhead Module to actuate high-current devices such as the head- lights, turn signals, and wiper motor. The hazard switch is a traditional switch and is di- rectly wired to the Bulkhead Module. Business Class M2 Workshop Manual, Supplement 10, September 2006 050/1