Trailer Electrical Systems 54.29 Troubleshooting Troubleshooting For electrical troubleshooting, see Table 1 . Description of Fault Possible Cause Electrical Troubleshooting Stop lights on at all times. Battery MEGA ® Fuse that supplies the trailer power distribution module (PDM) is open or missing. Trailer connector center pin (pin 7) is not providing desired power condition. Incorrect Reference Parameter. Intermittent or no electrical trailer operation at all outputs. Loss of connection. Check trailer PDM electrical connections and ground. No operation on single output. Trailer PDM components are inoperable. Check PDM fuse (blown) and relay (stuck) for that output.
Intermittent or no operation on single output. Loose terminal connection(s), damaged wire. Trace the suspect circuit. Table 1, Electrical Troubleshooting Trailer Connector Testing Make sure that the center pin is operating according to the programmed reference parameter. See Speci- fications 400 . Verify that all trailer lighting signals are operating properly. Test the taillights, marker lights, stop lights, parking lights, and turn lights. Business Class M2 Workshop Manual, Supplement 10, September 2006 300/1