Freightliner — Freightliner Business Class M2 Workshop Manual

Body Builder Engine Interfaces 54.36 Troubleshooting Troubleshooting engine interface harness or to the wiring installed by a body builder. When troubleshooting the engine interface harness, use the engine manufacturer’s diagnostic literature for problems that cannot be traced to the Freightliner Symptom Diagnosis Engine Interface Harness Troubleshooting The remote PTO on/off circuit is not functioning. Check that the pins are seated correctly in the Deutsch connector. Check the functionality of interlocks. The remote increment/decrement feature is not functioning. For a Mercedes-Benz engine with 2004 EPA specifications, perform the installation procedure in Subject 100 if necessary.

Check that the pins are seated correctly in the DT-series Deutsch connector. Make sure that all interlock conditions are met before operation. For a Caterpillar engine, check the engine programming. The remote throttle system is not functioning. Make sure that the engine has been programmed correctly for the remote throttle. Check that the pins are seated correctly in the DT-series Deutsch connector. Table 1, Engine Interface Harness Troubleshooting Make sure all interlock conditions are met before operation. Business Class M2 Workshop Manual, Supplement 10, September 2006 300/1