Freightliner — Freightliner Business Class M2 Workshop Manual

Electric Wipers, Trico 82.00 Connecting Arm Replacement Replacement 1. Turn off the engine, apply the parking brakes, and chock the rear tires. WARNING Disconnect the batteries before working on the wiper assembly. This will prevent the windshield wiper motor from cycling. The motor could cycle if the wiper linkage driveshaft is forced out of the parked position, which could result in personal injury. 2. Disconnect the batteries. 3. Open the hood. 4. Remove the seals and connecting arm from the pivot lever and motor lever. See Fig. 1 . 5. Inspect the seals for wear and damage. Replace if necessary. 6. Use grease to lubricate the inner diameter of the open socket on the connecting arm.

See Fig. 2 . 7. Fill the ball stud and socket interface with grease. 8. Attach the connecting arm to the pivot lever and motor lever. 9. Lower the hood. 10. Connect the batteries. 11. Remove the chocks from the tires. Business Class M2 Workshop Manual, Supplement 0, January 2002 110/1