3. Screw in sheet metal screw into the holes fitted with rubber. 4. Pull out seal with pliers. Figure 32 HTS016S 5. Press in shaft seal and shim with bush to stop. NOTE: Pay attention to pressing depth! * Mark for pressing depth. Assemble retaining ring. HTS017S Figure 33 SEALING CONTROL PARTS 1. H-Z- Controler. NOTE: Inspect O-ring, O-ring groove, housing. HTS019S Figure 34 SEALING RELIEF VALVE 1. Remove relief valve. Figure 35 HTS020S S0707365 Page 28 Travel Motor (With Gearbox) (A6V160HD)