D. During Braking. If the pressure of the cylinder drops below 11 kg/cm because the pressure oil of the brake valve is blocked, the piston (112) returns by the spring (113) force. 2 If the piston (112) is pushed by the spring force, the separator plate (116) and the friction plate (115) are pushed to the spindle of the reduction device. The friction force generated by this push generates braking torque (49.3 kg•m) to hydraulic motor shaft by removing turning force of the cylinder. It operates smoothly because of proper oil paths. Figure 6 S0707365 Page 8 Travel Motor (With Gearbox) (A6V160HD)