Komatsu — 20.1 PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS

MAINTENANCE 20. FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE 20.1 PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS It is not our policy to approve fuel, coolant and lubricants or to guarantee performance in service. The responsibility for the quality of the fuel, coolant and lubricant must remain with the supplier. When in doubt, consult your distributor. The specified fuel, coolant and lubricants recommended for this machine are as shown in the following table. SPECIFIED CAPACITY: Total amount of oil including oil for components and oil in piping. REFILL CAPACITY: Amount of oil needed to refill system during normal inspection and maintenance. ASTM:

American Society of Testing and Materials SAE: Society of Automotive Engineers API: American Petroleum Institute NLGI: National Lubricating Grease Institute WA380-3MC 3-9 RESERVOIR FLUID TYPE AMBIENT TEMPERATURE CAPACITY -22 -4 14 32 50 68 86 104 -30 -20 -10 0 10 20 30 40 Specified Refill Engine oil pan Engine oil 22 5.9 gal 22 5.9 gal SAE 30 SA E 10W SAE 10 W-30 SAE 15W- 40 Transmission case Engine oil 42 11.1 gal 40 10.6 gal Hydraulic system SAE 10W 190 50.16 gal 138 36.43 gal Front axle Axle oil See 20.4 DRIVE AXLE OIL SPECIFICATIONS on page 3-11 32 8.45 gal 32 8.45 gal Rear axle Pins Grease --- --- NL GI No. 2 Fuel tank Diesel fuel 287 75.77 gal - - ASTM D975 No. 2 ASTM No.

D975 1 Cooling system Coolant See 20.6 COOLANT SPECIFICATIONS on page 3- 12. 53 14 gal - -