Komatsu — 11.3 CONTROL LEVERS, PEDALS

OPERATION 11.3 CONTROL LEVERS, PEDALS 1. SPEED CONTROL LEVER MANUAL SHIFT This lever controls the travel speed of the machine. This machine has a 4-FORWARD, 4-REVERSE speed transmis- sion. Place the speed control lever in a suitable position to obtain the desired speed range: 1st and 2nd speeds are used for working; 3rd and 4th speeds are used for traveling. However, when the speed control lever stopper is being used, it is impossi- ble to shift to 3rd or 4th. Disengage the speed control lever stopper before trying to shift gears. Position 1: 1st gear Position 2: 2nd gear Position 3: 3rd gear Position 4: 4th gear REMARKS The length of the lever can be adjusted to 3 stages (position A, B, C).

To adjust the length, remove the screw at the bottom of the lever knob and slide the knob to the desired position. Tighten the screw again. The lever is installed at position (B) when the machine is shipped from the factory. WA380-3MC 2-22