OPERATION 12.1.2 CHECK BEFORE STARTING 1. Turn the start switch ON. 2. Check that all the monitor lamps, the gauges, and the warning lamp light up for about 3 seconds while the alarm buzzer sounds for 1 second. Do not perform the checks using just the monitor; always perform the items specified for the periodic maintenance. Tire Inspection WARNING If worn or damaged tires are used, they may burst and cause serious injury or death. When tires show the follow- ing wear or damage, reject them: Wear: Tires with a tread groove of less than 15% of that of a new tire. Tires with uneven wear or with stepped wear. Damage: Tires with damage that reaches the cords. Cracks in the rubber.
Tires with cut or pulled cords. Tires with damaged bead. Tires with peeled or separated surface. Deteriorated, deformed or abnormally damaged tires that do not seem usable. Rim inspection WARNING Check the rims (wheels) and rings for deformation, corrosion, and cracks. In particular, check the side rings, lock rings and rim flanges thoroughly. WA380-3MC 2-37