COMPRESSOR DRIVEBELT RENEWAL OF THE COMPRESSOR DRIVEBELT Remove the key from the ignition and apply the park- ing brake. 2 1 - Loosen the pivot and fixing bolts (1), (2) of the bracket (3) supporting the belt tensioner pulley (4). 4 1 3 F0043930 2 - For models with front PTO only: loosen and fully un- screw the six bolts (3) securing the flange of the cardan shaft (4). 5 3 - Detach the flange (5) from the flexible coupling (6). 3 6 4 F0017315 4 - Remove the old drivebelt (7) and fit the new one. 5 - Tension the drivebelt. 7 F0043940 1. Tensioning the drivebelt Before adjusting the tension, carefully examine the drivebelt for signs of wear.
The belt must be renewed immediately at the first sign of cracking, fraying or separation of the plies. If a new belt is fitted, re-adjust the tension after ap- prox. 15 operating hours. 8 1 - Remove the right-hand guard (8) and the engine hood. 2 - Loosen the pivot and fixing bolts (1), (2) of the bracket (3) as for the belt renewal procedure. F0043950 30-22