AIR CONDITIONING COMPRESSOR 6 - Loosen the screw of the tensioner block (8). 8 - Unscrew the threaded tensioner rod (9) to slacken the compressor/fan drivebelt (10). Slacken the drivebelt sufficiently to be able to slip it off the compressor pulley. 9 8 10 F0044140 8 - Remove the pivot bolt and remove the complete com- pressor assembly (2). 2 F0017400 REFITTING THE AIR CONDITIONING COMPRESSOR Refitting is the reverse of removal. 1 Remove the plugs and connect the pipes immediate- ly, fully tightening the fittings, to prevent the entry of moisture. Check the condition of the O-ring seals and renew them if damaged. 1 - Adjust the tension of the compressor/fan drivebelt.
(For details see «ADJUSTING THE TENSION OF THE COMPRESSOR DRIVEBELT»). 2 - Flush and recharge the system. (For details see «DISCHARGING, FLUSHING AND RECHARGING THE AIR CONDITIONING SYSTEM»). 30-40