Deutz — REFITTING

GEARBOX OIL/FUEL COOLERS 6 - Remove the cooler assembly (1), (4) by pulling the han- dle (11) upwards. 11 Keep the coolers vertical to prevent spillage of oil/fuel. 1 4 F0017490 7 - Only if the assembly is to be renewed: a - Draw off the fuel and oil from the coolers. b - Recover the pivot bolts (12), the brackets (13) and the handle (11) and fit to the new assembly. 11 13 1 12 F0017500 REFITTING THE GEARBOX OIL/ FUEL COOLERS Refitting is the reverse of removal. 1 Bracket retaining bolts: Loctite 222 1 - Start the engine and allow the gearbox oil and fuel to circulate for about 5 minutes to fill the coolers; check the seals and fittings for leaks.

2 - Stop the engine and check the gearbox oil level; top up, if necessary. This operation is essential if new coolers have been fitted. 30-44