Deutz — REFITTING

EXPANSION TANK REMOVAL OF THE EXPANSION TANK 1 - Partially drain the engine cooling system. 3 Coolant: approx.10 (2.64 US. gall.) 5 3 2 - For 4-cylinder models: disconnect the pipe (1) and remove the retaining nut (2) of the tank (3). For 6-cylinder models: disconnect the pipe (4) on the left-hand side and remove the pin (5) securing the tank (3). 1 2 4 F0044290 3 - Disconnect the pipes (6) and (7) on the right-hand side. 4 - Unscrew and remove the nut (8) and washer (9). 6 7 8 9 F0044300 5 - For 6-cylinder models: unscrew and remove the bolt (10) with the washer (11) and spacer (12). 3 6 - Remove the expansion tank (8).

10 11 12 F0044310 REFITTING THE EXPANSION TANK Refitting is the reverse of removal. 1 - Fill the engine cooling system. Coolant: approx 10 (2.64 US. gall.) 2 - Start the engine and run for a few minutes to allow the coolant to circulate. 3 - Stop the engine, check the level in the expansion tank and top up if necessary. 30-47