COMPLETE RADIATOR/COOLERS ASSEMBLY REMOVAL OF THE COMPLETE RADIATOR/COOLERS ASSEMBLY 1 - Remove the side panels and the lamp assemblies. 3 2 - Recover the refrigerant from the system. (For details see «DISCHARGING, FLUSHING AND RECHARGING THE AIR CONDITIONING SYSTEM»). 1 3 - Disconnect pipes (1) and (2) from the condenser and the receiver-drier and the wiring harness (3). 1 Immediately plug the ends of the pipes and the open fittings on the condenser and receiver-drier to prevent moisture from getting into the system. 2 F0044161 4 - Drain the coolant from the engine cooling system. Coolant:
4 5 5 - Remove the bolts and remove the right-hand pipe guide (4), the intercooler pipe (where present) and the retaining straps (5) of the front wiring loom. F0044370 6 - For models with intercooler, remove also the left-hand guide (6) for the air pipe. 6 F0044380 7 - Release the pipes (7), (8) and the wiring from the re- taining straps 8 - Label and disconnect the pipes from oil cooler (8) and fuel cooler (9). Immediately plug the ends of the pipes and the open fittings on the coolers to prevent the entry of contaminants. 7 10 9 - Disconnect the hoses (10), (11) from the radiator; re- cover the bulkhead fitting (12). 9 8 F0044390 30-50 Mod.
80 85 90 100 105 15.5 15.5 15.5 15.5 17.5 US.gall. 4.10 4.10 4.10 4.10 4.62