Deutz — REFITTING

RADIATOR/COOLERS ASSEMBLY REFITTING THE RADIATOR/COOLERS ASSEMBLY Refitting is the reverse of removal. 1 Remove the plugs and immediately connect the pipes, fully tightening the fittings, to prevent mois- ture from getting into the system. Check the condition of the seals and renew them if damaged. 2 Carefully check the condition of the O-ring seals on the pipes; if in the least doubt about the con- dition of these parts, fit new ones. 1 - Flush and recharge the air conditioning system. (For details, see «DISCHARGING, FLUSHING AND RECHARGING THE AIR CONDITIONING SYSTEM»). 2 - Fill the engine cooling system with coolant. Coolant: Mod. 105 17.5 US.gall.

4.62 3 - Start the engine and run for a few minutes to allow the coolant to circulate. 4 - Stop the engine, check the coolant level in the expan- sion tank and top up if necessary. 30-53 80 85 90 100 15.5 15.5 15.5 15.5 4.10 4.10 4.10 4.10