Deutz — REMOVAL

4WD PROPELLER SHAFT REMOVAL OF THE 4WD PROPELLER SHAFT (Version without front suspension) Remove the key from the ignition and apply the park- ing brake. 1 - Using suitable lifting equipment, raise the front of the tractor by about 10-12 cm (4-5 in.). 2 - Position a jack “ A “capable of supporting the tractor's weight under the front carrier. A F0044630 3 - Support the lower guard (1), remove the nut (2) with its washer and the bolt (3). 4 - Remove the front bolts and remove the guard (1). 1 2 3 F0017832 5 - Position a jack” B ” under the shaft (4) and remove the flange bolts and nuts (5). 1 To enable removal of the upper bolts, turn the wheels by hand.

4 5 F0044640 6 - Position a jack under the shaft (4) and remove the flange bolts and nuts. 2 4 B F0044650 30-63