Deutz — ADJUSTMENT

ADJUSTMENT OF THE BRAKE LIGHT SWITCHES ADJUSTMENT OF THE BRAKE LIGHT SWITCHES The switch for each pedal is adjusted separately. 1 - Check that the pedal latch pin (1) slides freely to con- nect and disconnect the two pedals (2). 2 1 F0018790 2 - Force the pedals (2) upwards and check that the brake light switches (3) have an extra opening travel of 1 ± 0.2 mm (0.04 ± 0.008 in.). This extra travel protects the switches from im- pacts at the end of travel caused by sudden re- lease of the pedals.

3 2 F0018800 3 - If the switches (3) do not have this extra travel, loosen the screws (4) so that they just grip the switch; move the switch towards the front of the tractor and tighten down the screws (4) to fix it in position. 4 4 3 F0018810 30-72