POWER STEERING UNIT 9 - Checking through the central hole of the spool valve, ensure that the pin (16) connecting the inner and outer sleeves of the spool is positioned horizontally. Push the entire spool assembly (17) and the bearing out of the steering unit housing (18). 17 18 F000 9550 10 - Remove the outer thrust washer (19), the inner thrust washer (20) and the needle roller bearing (21) from the spool; remove also ring (22). The inner thrust washer (20) (thin) can sometimes remain inside the housing; check that it is re- moved. 22 20 19 21 F000 9560 11 - Remove the trim spin (16), outer sleeve (17b) and the inner sleeve (17a). Use the special cover bolt (3).
17 b 3 16 17 a F000 9570 12 - Carefully slide the inner sleeve (17a) out of the outer sleeve (17b). 17 b 17 a F000 9580 30-78