POWER STEERING UNIT 32 - Fit the pressure adjuster screw (33). Set the maximum operating pressure on a test bench. Pressure: 180+10 bar (2610+145 psi) 33 F000 9670 33 - Fit plug (31) complete with seal. Plug: 50 ± 10 Nm ( 36.8 ± 7.4 lb.ft.) 31 F000 9660 34 - Position the dust seal (24) in the power steering unit housing (18). 24 18 F000 9970 35 - Drive the dust seal (24) into its seating using a suitable drift and a plastic mallet. F000 9980 30-90