FRONT LIFT CYLINDERS REMOVAL OF THE FRONT LIFT CYLINDERS Raise the lift to its full height and switch off the engine. 1 - Remove the lift arms (1) and the pivot pins (2) along with their retaining chains. 1 2 - Position under the lift assembly (3) a jack” A ” which can be lowered at least 10 cm (4 in.). 1 2 3 2 A F0017970 3 - Remove the bolts (4) and remove the upper pins (5) of the cylinders (6). 5 6 4 6 F0017980 4 - Disconnect the cylinder feed pipes (8), (9) from the valve block (7). Loosen the fitting by a few turns, but before fully disconnecting them, push them to detach them from the couplers and release any residual pres- sure in the system.
Label the pipes to avoid confusion on reconnec- tion. 7 8 9 F0017941 5 - Lower the jack” A ” until the cylinders (6) can be tilted outwards in order to access the connection pipes and to align the hole provided for removal of the spring pins securing the lower pivot pins of the cylinders. 6 6 A F0017990 30-96