POWER STEERING - LIFT AND HYDRAULIC SERVICES PUMPS 2. Removal of the lift and hydraulic services pump 1 - Remove the power steering pump as described under the previous heading. 1 2 - Disconnect the delivery pipe (2) from the gearbox pump (1). 2 F0045072 3 - Disconnect the suction and delivery pipes (4) and (5) from the pump (3). Renew the O-ring on the suction flange on re- assembly. 3 4 5 F0045190 4 - Disconnect and remove the pump connection pipe (7) from the suction filter (6). 7 F0045200 6 5 - Remove the bolt (8) and remove the bracket (9) se- curing the sensor (10). 10 9 8 F0045210 30-123