Deutz — DISASSEMBLY

AUXILIARY CONTROL VALVE STACK DISASSEMBLY OF THE AUXILIARY CONTROL VALVE STACK (Description refers to left control valve assembly) The control valves are assembled in stacks and should only be disassembled in order to renew parts; any overhaul of the control valves should be carried out directly by the manufacturer or an authorised ser- vice centre. To disassemble the right control valve, follow the same procedure. 1 - Loosen and remove the quick-action couplers (1) and the relative seals. 1 F0045340 2 - Remove the control valve blocks. (For details, see «REMOVAL OF THE CONTROL VALVES»). 2 3 - Loosen and remove the nuts (2) securing the control valve spool sections.

Loosen the nuts gradually to eliminate the elastic- ity of the seals between the spool sections. 1 F0045350 4 - Remove in order the end cap (3), the first spool section (4), the spool section piloted by the lift (5), the second spool section (6) and the end cap (7). 3 4 5 6 7 2 5 - Repeat these operations for the right control valve block, bearing in mind that this block consists of just 2 manually controlled spool sections separated by a spacer. F0045360 30-128