Deutz — OPENING AND REMOVAL

RIGHT-HAND CONSOLE 6 - Drive out the spring pin (9) and remove the creeper en- gagement lever (10). 9 10 F0019852 7 - Remove the screw (11) move the support (12). 11 12 F0019862 8 - Unplug the connector (13) of the lever position sensor (14). 5 0 +1 If the sensor (14) has been removed or re- placed, on refitting adjust the protrusion to 5 1 mm (0.197 0.04 in.) relative to the tightened nut. 0 + 0 + 14 13 F0019872 9 - Withdraw the pin (15) and disconnect the creeper con- trol cable (16). 1 15 16 F0019882 30-148