Deutz — REFITTING

CAB 31 - Slowly raise the cab by about 15 cm and check that all the lower cables and connection pipes are discon- nected. Complete cab assembly: approx 780 kg (1718 lb.) 35 - Release the wiring from all the clips and remove the cab while guiding the pipes and control cables. REFITTING THE CAB Refitting is the reverse of removal. 1 Air conditioning pipes fittings: delivery (5/8” - 18UNF):13,6–20,3 Nm (10–15 lb.ft.) suction (7/8” - 14UNF): 35,3–42 Nm (26–31 lb.ft.) 1 - Fill the engine cooling system. Coolant : 2 - Fully open the cab heater valve. 3 - Start the engine and check the hydraulic, pneumatic and heating systems for leaks.

4 - Turn the steering wheel back and forth between the full lock positions to expel any air from the power steering circuit. 5 - Switch off the engine; check the coolant level and top up if necessary. 6 - Bleed the hydraulic brake system. (For details, see «BLEEDING THE BRAKE SYSTEM»). 30-195 Mod. 80 85 90 100 105  15,5 15,5 15,5 15,5 17,5 US.gall. 4.10 4.10 4.10 4.10 4.62