ENGINE AND TRANSMISSION ASSEMBLY OF ENGINE - TRANSMISSION Refitting is the reverse of removal. 1 Bleed the braking system. (For details, see «BLEEDING THE BRAKE SYS- TEM»). 2 M12 nuts and bolts: 110 ± 10% Nm (81 ± 10% lb.ft.) M16 nuts and bolts: 260 ± 10% Nm (191.7 ± 10% lb ft.) First tighten the nuts, then the bolts, proceeding in diagonal sequence. 3 Clean mating faces thoroughly; lubricate sur- faces and locating dowels. Locating dowels: Engine oil 1 - Fill all the systems with the appropriate fluids. Start the engine and run for a few minutes to allow the fluids to circulate, then check for leaks. 2 - Bleed the air from the hydraulic circuits by performing a few manoeuvres.
3 - Stop the engine, check all the fluid levels and top up if necessary. 30-204