COMPONENTS 3.3 PINOUTS AND DESCRIPTIONS OF ELECTRONIC CONTROL UNITS 3.3.2 TRANSMISSION CONTROL UNIT 40-39 CONNECTOR E.C.U. (PS) 2 22 45 24 68 46 Pin Volts.
Abbreviation Description 1 0V VM1 Battery negative 2 0V VM2 Battery negative 3 0V VMG1 Reference voltage for signal on pins 16, 17, 40 and 62 4 0V VMG2 Reference voltage for signal on pin 44 5 ADM4 Output for fault warning light 6 Not utilised 7 Not utilised 8 VPS2 Power (+) common solenoid valves Y1, Y2, Y3, Y4, Y5 9 Not utilised 10 Not utilised 11 ADM6 Power, solenoid valve Y2 12 Not utilised 13 +12V VPS1 Power (+), proportional solenoid valve and solenoid valves Y6, Y7 14 SD1 Display control signal 15 SDDK Diagnostics connector 16 EF5 Digital input, main clutch revs sensor (NHK) 17 EF7 Digital input, input revs sensor (nMot.
nLse) 18 Not utilised 19 Not utilised 20 ED3 Analogue input, reverse travel command signal 21 ED10 Battery positive (15+) 22 ED7 Digital signal, range downshift pushbutton 23 VPE1 Battery positive (30+) 24 VMGA1 Power (-) clutch pedal angular position sensor and temperature sensor 25 CAN H CAN H 26 CAN L CAN L 27 CAN RES CAN RES 28 Not utilised 29 ED11 Analogue input, low transmission oil pressure signal 30 Not utilised 24