HYDRAULIC FRONT AXLE SUSPENSION FRONT SUSPENSION CONTROL VALVE OPERATION 1. When the suspension is deactivated PA 1 2 6 ASP1 ASP2 8 7 P1 Y T BL2 SV2 S AV DBV1 DBV2 4 A RV3 210 bar ZSP1 b RV2 H 5 SV1 B RV1 BL1 P a 3 D0013030 When the suspension is deactivated, the electronic control unit energises the solenoid that controls the oil supply to the control valve (1). This allows the pressurised oil from the pump (2) to flow to line a and compress the membrane of the accumulator (3) up to the maximum circuit pressure. The oil is discharged from the piston side through passage b and through the solenoid valve (7) which is energised.
The piston (4) is consequently pushed upwards to its stroke-end position, thereby returning the system to fixed axle condition. The suspension is deactivated by the operator pressing a switch. 10-34 T