SERDIA ENTRY AND COMUNICATION 1.8 WORKING WITH THE PROGRAM Brief description: 1) Call SERDIA under Windows 2) Click on ECU selection in the SERDIA main screen 3) Select the ECU you require in the screen "ECU selection" 4) Select the menu point you require in the SERDIA main screen 1.8.1 MAIN SCREEN, MENU SELECTION A predefined selection menu is displayed in the main screen. Brief description of the buttons: 20-9 Menu point ECUs Explanation ECU selection All Selection of the required ECU.
(Only one ECU can be selected at any time) Aktuelle Actual measured values All Display of current actual values (also if engine not in operation, but in this case with U-Blatt) RAM values Only for level III Data logger EMS Only Display recorder contents Input/output assignment All Assignment of the signals used to the ECU pins CAN-Status Parameters Configuration All Read and update configuration data Overall programming EMR, EMS Calibration All Calibration of measured value sensor, e.g.
accelerator pedal sensor Error memory Error memory All Copy, display and delete error memory Function test EMR Only Operate actuator Extras Maximum speed EMR Only Selection of three different maximum speeds Logistic data All Load spectrum EMS Only Maintenance interval exceeded EMS Only Override memory EMS Only Help All General help for the main screen and the associated buttons