SERDIA MEASURED VALUES 3 MEASURED VALUES 3.1 ACTUAL MEASURED VALUES (GENERAL) The measured values are read cyclically and displayed on the screen "actual measured values".. Figure: Current measured values of the EMR ATTENTION! Values beyond the sensor measuring range are underlayed in colour: yellow: above measuring range, blue: below measuring range. Description of keys : Meas. values: (“Actual measured values”): The window "Measured value selection" is displayed with all measured values available. Measured values to be displayed can be selected there. In general, the repeat rate of display is increased through a reduced number of measured values to be displayed.
The possible measured values available may vary according to the type of the ECU. Graphics: The "Graphics" switch is used to display the pattern over time of the selected measured variables (maximum 5). If more than 5 variables are selected, an error message appears. 20-14