. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING the door at the left of the machine, and check if the SYSTEM (PAGE 4-25)". 3 - 114 Do no t open the r adiator cap unles s necessary. W hen checking the coolant, always wait for the e ngine to cool down and c heck the s ub-tank. Immediately after the engine is sto pped, the coola nt is at a high te mperatur e and the radiator is under high internal pressure. If the cap is rem oved to check the coolant level in this condition, there is a hazard of burns. W ait for the temperature to go down , then turn t he cap slowly to release the pres sure and remov e it carefully. 1.
Op -tank (1) (show am on the righ t) is between the F ULL and LOW marks. If the c oolant level is low, add coolant to the FULL level through the fil ler port of sub-tank (1). Afte If the sub-tan coolant. After k (1) is empty inspecting, rep , there is pr air any probl obably leakag em immediate e of ly. If or. If ther e is no pr oblem, check th e coolant lev el in the radiat the coolant le vel is low, add c oolant to the r adiator, then fil l the sub-tank (1). 4. If th e inside o f sub-tank (1) is dirty and the water level ca nnot be seen, use t he procedure in "CLEAN INS IDE OF COOLING